วันศุกร์ที่ 28 สิงหาคม พ.ศ. 2552

18-Volt Power Cordless Drill & Driver Kit with Accessories

Buy Cheap 18-Volt Power Cordless Drill & Driver Kit with Accessories


Buy Low Price From Here Now

Unlike other cordless drills on the market that "advertise" 18V on its label, our 18V cordless drill is an outstanding value that has true 18-volt power with a 1200 mAh Ni-Cd battery, and of course, with our unbeatable price, the lowest yet quality cordless drill on the market. Features variable-speed and reversible clutch, keyless chuck for fast and easy bit changes, drill-bit, driver kit, UL-listed charger and a blow molded ABS carry/storage case.
Readmore

Technical Details

- 18 Volt Cordless Drill
- 3/8" Keyless Chuck
- Variable Speed
- Reversible
- 16 Position Clutch Controls Torque Settings
See more technical details
Customer Buzz
 "good working tool, not that much for the plastic cover" 2006-07-27
By Essam Mostafa K. Labib (Kuwait, Farwania Kuwait)
i got this drill 5 dayes back, and the first immprestion about it was it looks cheep, because of the kind of plastic they use, also the handle grip is not that good as it is in plastic not rubber, also i found that it is kind of heavy, also there is one remark about the charger which has 2 LED's one green and one red, both kept luminated all the time even after 10 hours of charging, even it was noted on the charger that it will charge from 3-5 hours only.

for the motor, gear and variable bush button they seemed to work perfectly good which is the most important thing.

extra battery is not available till now.

end opinion, it is good performer for the kind of money paied for, and worth buying for normal house use.


Images Product

Buy 18-Volt Power Cordless Drill & Driver Kit with Accessories Now

1-1/2" SDS Rotary Hammer Drill Concrete Power Tool

Buy Cheap 1-1/2" SDS Rotary Hammer Drill Concrete Power Tool


Buy Low Price From Here Now

1-1/2" SDS Rotary Hammer Drill. This high quality rotary hammer drill features: * 110V/60Hz, 1000 Watt motor * No Load Speed: 800 RPM * Shock Frequency: 0-3000 BPM * Concrete Capacity: 1-1/2" * Steel Capacity: 1" * SDS chuck with handle that can be rotate
Readmore

Technical Details

- 1-1/2" SDS Rotary Hammer Drill 110V/60Hz 1000 Watt Motor
- Shock Frequency of 0 to 3000 bpm allows you to use it for concrete up to 1-1/2 inches and steel up to one inch.
- Adjustable handle can be rotated to any angle.
- 800 rpm no load speed
- Set includes drill, 3 bits and 2 chisels in custom formed case
See more technical details

Images Product

Buy 1-1/2" SDS Rotary Hammer Drill Concrete Power Tool Now

Hitachi DB10DL 10.8-Volt Li-Ion Micro Driver Drill

Buy Cheap Hitachi DB10DL 10.8-Volt Li-Ion Micro Driver Drill


Buy Low Price From Here Now

Variable speed trigger. Free-standing, balanced tool weight insures wrist alignment and reduces fatigue. Ergonomic handle with secure grip. Drill mode for precision and control in both forward and reverse; 21 torque settings. LED light ring. Quick change 1/4" hex chuck. Battery charge indicator light. HXP batteries. Charger circuitry prevents overheating and power loss. Specifications: 1/4" hex, 88 in/lbs torque, 0-400 RPM, 10.8V battery, 1.5Ah battery, 21 plus 1 clutch stages, LED ring light, Lithium- ion battery type. Includes: (2) No.329370 1.5Ah Lithium Ion batteries, No.UC10SFL charger, carrying case, driver bit, 7-piece bit set.
Readmore

Technical Details

- 88 Inch Pounds of Torque
- 21 Stage Clutch with an additional drill setting
- Battery Charge Indicator light
- LED light ring illuminates the on the work surface
- Quick Change 1/4" Hex Chuck
See more technical details
Customer Buzz
 "lack of power" 2009-07-22
By Larry D. Strom
Although I have bought Hitachi tools in the past I have never bought their cordless products. I found the balance and compactness of the product impressive. The power for the product and torque was not. It should have been listed as pounds of torque which I would estimate to be less then 100. This is not enough to drive 3 inch screws.. Even 2 1/2 drywall screws were a problem..The battery does seem to hold a charge extremely well...But time will tell. I own a Makita 9 volt niCa also for 20 years.. It has twice the power and only 9 volts...the 10.8 li-ion is great for light to medium projects only! It also would be nice if the product description would say that it only takes 1/4 inch shanks and is not adjustable

Customer Buzz
 "DONT BUY THIS JUNK" 2009-06-03
By J. Korbett (So.Cal)
I bought 3 Crap-tachi drills that came with 6 batteries. After a year and a half 5 of the batteries have gone bad. You think you got this great warranty with it you don't its a joke read the fine print, it only covers the drill it self, so what do you do with a drill with no batteries? I called the customer service line its even worst, The customer service agent told me I should have bough a Makita instead and I would have not had this problem. So I went down to there repair center and talked to the guy about it, he says the all this Hitachi stuff is junk, and they have nothing but problems with it. DON'T BUY THIS CRAP LEARN FROM MY MISTAKE I NOW HAVE 3 DRILLS 1 BATTERY AND OUT $ [...]

Customer Buzz
 "Awesome" 2009-05-26
By E. Jacob (Lewisburg, PA)
This is one of the best deals I have gotten from Amazon. The price is unbelievabe and the product can not be beat! I have usee this drill several times and find it to be outstanding for a small hand tool and the battery life is great.

Customer Buzz
 "Power in a small, lightweight package ..." 2009-05-14
By Gregory M. Brettell (Reno, NV USA)
I'll make this short ... this little driver is a powerhouse!



Soon after I received I had a job to do ... my kids thought it would be interesting to see what was in our neighbors yard, SO ... they decided to tear out the aging fence boards to go check it out. I was horrified to see a gaping hole in our fence leading into the neighbors yard!



I fired up the new drill and had that fence repaired in no time at all (I actually enjoyed it ... but don't tell my kids that!).



This tool is well worth it (I purchased when it was selling for $62.50 and free shipping -- can't beat that price). This is better than my expensive DeWalt (which is much heavier, way less power, and won't stand on its' own when you set it down -- not balanced).



O.K. that wasn't very short afterall, but hopefully you enjoyed the story.



Buy it ... you'll love it!



GMB

Customer Buzz
 "Great feel, great battery life" 2009-03-29
By Benbrilling (Santa Cruz, CA USA)
I really like the feel of this tool. I bought it about 6 months ago and charged it up, played with it a bit, but haven't really had a need to use it until now. The battery still had plenty of charge after sitting in the case for 6 months! A NiCad would need a full a charge before using after that long. I like the balance, the controls, and the impression of quality I get from it. The quick change is really handy and if you buy a set of quick change drill bits you will be ready to easily tackle any medium sized job with ease with this little guy. My only complaint is the case it comes in. It is obviously made for a much larger drill and is a real shame to spoil the convenience of a compact drill with a big half-empty case. Because of the built in interior contours of the case (made to fit a larger drill) it isn't practical to use the wasted space for additional bits or drills. But that's not enough of a bother to knock off any stars from my top rating.



Edit: After using this for several months I have grown to really appreciate the built-in light. It really helps you to position the blade on the screw before you start. The trick is to just pull the trigger slightly and the light comes on but the drill doesn't start turning until you pull the trigger more (after you've seated the bit into the screw).


Images Product

Buy Hitachi DB10DL 10.8-Volt Li-Ion Micro Driver Drill Now