18-Volt Power Cordless Drill & Driver Kit with Accessories

Buy Cheap 18-Volt Power Cordless Drill & Driver Kit with Accessories

Buy Low Price From Here Now
Unlike other cordless drills on the market that "advertise" 18V on its label, our 18V cordless drill is an outstanding value that has true 18-volt power with a 1200 mAh Ni-Cd battery, and of course, with our unbeatable price, the lowest yet quality cordless drill on the market. Features variable-speed and reversible clutch, keyless chuck for fast and easy bit changes, drill-bit, driver kit, UL-listed charger and a blow molded ABS carry/storage case.
Readmore

Technical Details

- 18 Volt Cordless Drill
- 3/8" Keyless Chuck
- Variable Speed
- Reversible
- 16 Position Clutch Controls Torque Settings
See more technical details

 "good working tool, not that much for the plastic cover" 2006-07-27
By Essam Mostafa K. Labib (Kuwait, Farwania Kuwait)
i got this drill 5 dayes back, and the first immprestion about it was it looks cheep, because of the kind of plastic they use, also the handle grip is not that good as it is in plastic not rubber, also i found that it is kind of heavy, also there is one remark about the charger which has 2 LED's one green and one red, both kept luminated all the time even after 10 hours of charging, even it was noted on the charger that it will charge from 3-5 hours only.

for the motor, gear and variable bush button they seemed to work perfectly good which is the most important thing.

extra battery is not available till now.

end opinion, it is good performer for the kind of money paied for, and worth buying for normal house use.


Images Product

Buy 18-Volt Power Cordless Drill & Driver Kit with Accessories Now

1-1/2" SDS Rotary Hammer Drill Concrete Power Tool

Buy Cheap 1-1/2" SDS Rotary Hammer Drill Concrete Power Tool

Buy Low Price From Here Now
1-1/2" SDS Rotary Hammer Drill. This high quality rotary hammer drill features: * 110V/60Hz, 1000 Watt motor * No Load Speed: 800 RPM * Shock Frequency: 0-3000 BPM * Concrete Capacity: 1-1/2" * Steel Capacity: 1" * SDS chuck with handle that can be rotate
Readmore

Technical Details

- 1-1/2" SDS Rotary Hammer Drill 110V/60Hz 1000 Watt Motor
- Shock Frequency of 0 to 3000 bpm allows you to use it for concrete up to 1-1/2 inches and steel up to one inch.
- Adjustable handle can be rotated to any angle.
- 800 rpm no load speed
- Set includes drill, 3 bits and 2 chisels in custom formed case
See more technical details

Images Product

Buy 1-1/2" SDS Rotary Hammer Drill Concrete Power Tool Now

Makita Factory-Reconditioned 5/8" Hammer Drill Kit w/ Light & Case HP1621FK

Buy Cheap Makita Factory-Reconditioned 5/8" Hammer Drill Kit w/ Light & Case HP1621FK

Buy Low Price From Here Now
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes.
The Makita HP1621FK is a Factory Reconditioned 5/8 inch Hammer Drill. The rock hard heavy-duty 5/8 inch hammer drill is exceptionally well balanced and it quickly and efficiently transfers power to the drill bit with the lowest vibration. The innovative forward/reverse change system is for extended service life of carbon brush and the lock-on button for continuous operation. Includes: 5/8 inch Hammer and Case.
Readmore

Technical Details

- 2-mode operation; "rotation only" and "hammering with rotation"
- Lightweight (3.7 lbs) with large capacity drilling up to 5/8 inch in concrete
- Large two-finger trigger switch with 360° swivel side handle for added maneuverability
- Rubberized comfort grip for more comfort, control and reduced operator fatigue
- True variable speed for controlled start-up
See more technical details

 "Needed a hammer drill" 2009-08-19
By R. Reese
Needed a hammer drill for a small amount of work. this was a recond drill. It looked ok and worked fine. I bought it for a good price. Overall happy with this drill but if I had lots of work to do I would have bought a better unit.

 "waste of money" 2009-08-07
By J. Dredd
the chuck on this drill is useless. it sounds like plastic inside and stripped and failed to sufficiantly hold the bit (a small 5/32 tapcon bit) on the first bit i used. After a very long day of tightening the chuck with pliers just to get the job done, the drill smelled like it was burning up too. Had I paid more than $40 for it, iwould be livid, 75-100 tap con holes out of a drill is totally unacceptable. I've been a professional carpenter for +17 years and the tool market has gotten so bad over the years that Makita is the only brand I can usually trust. I sincerely hope that this cheap depot/lowes homeowner model is not a trend for them.

 "No surprises" 2009-08-03
By Brian D. Bannerman (Brentwood, CA)
The drill arrived in like new condition with instructions and carrying case. I used it to drill several holes in concrete and it did the job.

 "Good Drill" 2009-08-02
By D. Kishler (Ohio)
Reconditioned drill was like new, case and depth gauge looked new. Very good value, excellent 1/2" drill, good chuck. This is a good drill for home or light commercial work. It is about the same size as my Craftsman 3/8" drill only capable of 1/2" shank drills. Quick shipping / good purchase.

 "Hammer Drill" 2009-05-29
By Larry Spradling
This drill did everything that I needed it to do. It makes drilling into brick or masonry extremely easy. It has a switch from a regular drill to a hammer drill and has a capacity for drill bits up through 1/2". The drill looked as close to new as you can get and still be called refurbished. You won't find a better buy than this.


Images Product

Buy Makita Factory-Reconditioned 5/8" Hammer Drill Kit w/ Light & Case HP1621FK Now

Milwaukee 0302-20 8 Amp 1/2-Inch Drill with Keyless Chuck

Buy Cheap Milwaukee 0302-20 8 Amp 1/2-Inch Drill with Keyless Chuck

Buy Low Price From Here Now
This powerful drill has the construction and performance to eliminate any other 1/2in. drill in its category. This heavy-duty Magnum drill is built for industrial/construction applications. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool to drill into wood, metal, plastics and composites. U.S.A. Amps: 8, Chuck Size (in.): 1/2, Speed (RPM): 850, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: Yes, Variable Speed: Yes
Readmore

Technical Details

- Powerful 8-amp motor, 0 to 850 rpm, variable speed control
- All metal grip-lok single sleeve keyless chuck for a stronger hold on the bit and all metal gear case and diaphragm
- 360-degree locking side handle
- Ergonomic tactile grip and 2 finger trigger for user comfort and balance
- Backed by limited warranty
See more technical details

 "Great Drill For Garden Auger!" 2009-06-29
By Joseph W. Casale (West Hartford, CT USA)
I bought this drill to use with a 2.75" x 26" Bulb/Plant Auger and a 4.75" x 26" Planting Auger, both of which I purchased from Gempler's. The keyless chuck makes it easy to exchange these augers and holds them in securely. This is a powerful drill which makes using these augers a snap for drilling holes in the ground. But you do have to hold on securely. If you hit a rock or tree root, the drill will catch and spin your wrist around if you are not careful. I also bought two 50 foot, 12-gauge three-wire, grounded extension cords for work farther out in my backyard, and the drill works fine. I'm buying a lot more plants for my rock garden and butterfly garden because planting is so much easier now. Great Product!

 "Undoubtedly the best 1/2 inch corded drill available" 2009-04-04
By Newton Fawcett (Hattiesburg, MS)
Best 1/2 inch chuck. Very easy to use yet grips with tremendous force and releases easily. Best variable speed circuitry and trigger. Very smooth continuous speed control over entire range. Best power for its size (8 Amps!) I have used many other corded drills. This is the best by far.

 "Excellent product" 2008-12-09
By Mark J. Harrington (Granby, CO)
I have had this model for over a year now and am ordering another for a gift to my electrician friend. I was amused by some of the reviews - Joe's in particular. This is a great drill. I used (abused) the predecessor with keyed chuck for over 20 years before replacing it with this model last year. Joe - the cord is wonderful the way it is. It disconnects for easier replacement. Over the 20+ years I replaced the cord on the last one twice. The handle (sissy bar) sticks out that far for added leverage. Put a 4" hole saw on this baby and it has enough torque to break your arm. Since I am a contractor I use a hole hawg for mixing drywall mud and heavy stuff. I use my three cordlesses for most light drilling and srewdriving. I use a SDS hammerdrill for concrete. However - I have used these magnums for all of the above when it was more expedient or the more proper tool was not close by. This thing can do it all, do it well and do it quickly. It's relatively small size might be misleading. I recommend the proper drill for your job at hand as mentioned above but I cannot imagine a better all-round tool for a homeowner who does not have all the drills I do. Joe - don't badmouth a great tool because you do not know how to use it's design features.

 "its a beast " 2008-11-27
By K. M. Kemp (Fremont, CA)
this is a heavy duty drill that will easily handle hole saws or spade bits. has tons of torque. i like the power cord that can be disconnected and replaced if necessary. make sure to use the side handle cause this thing can really give your arm a good twist. like all milwaukee tools, this is built to last

 "OK" 2008-10-06
By Joe S. Powell (Wellington, OH)
This drill works well; is sturdy and strong; chuck grips the bits well. I am not sure what the removeable cord does for it though. I also wish it had some sort or "hook" or "loop" to use for hanging it on ladders or a tool belt. I also wish it were made in USA - I thought it was when I ordered it. I also wish the clamp-on handlebar has the grip closer to the drill instead of extending out so far.


Images Product

Buy Milwaukee 0302-20 8 Amp 1/2-Inch Drill with Keyless Chuck Now

Hitachi D10VH 6 amp 3/8-inch Drill with Keyless Chuck

Buy Cheap Hitachi D10VH 6 amp 3/8-inch Drill with Keyless Chuck

Buy Low Price From Here Now
3/8", 6.0 Amp Motor, Variable Speed, Drill, Small Lightwieght Design, Convenient 3/8" Keyless Chuck, Variable Speed Dial In Switch, Comfortable Rubber Grip, Weight 3.9 LBS, 5 Year Warranty.
Readmore

Technical Details

- 3/8-inch Key Less chuck
- 6 amp
- 120-volt
- Ergonomic grip
- Hitachi exclusive 5-year warranty
See more technical details

 "good for what it is" 2009-07-14
By Addison J. Brock (Lihue, Hawaii)
I've been a carpenter on kauai for about 4 years and i really like this drill. It has enough power to bor som pretty big holes into pressure treated lumber but what i like is it doesn't have so much power that it will torque your wrist. I have an old milwauke with tons of power it's a really good drill but sometimes its better not to have so much power for example on a ladder when you can only hold the drill with one hand. so i give it 5 stars because it is exactly what i was hoping for and it is also heavy duty and at a good price.

 "Great drill for a great price!" 2009-07-05
By Jeff Robison
We were building some furniture with our 14.4V cordless Hitachi drill when we realized it wasn't powerful enough. We decided to get a corded drill for some extra power. We picked this drill up and it does a great job. It forced screws through 4x4s and other boards with ease. We didn't have to bother pre-drilling our holes either. The keyless chuck can be a bit weak if you are trying to use a large bit to drill a large hole, but that's not what this drill is made for, so I'm not figuring that into my review. Overall this is a great drill.

 "Could be an OK 3rd or 4th drill" 2009-06-23
By Antonio (Canada)
I bought this as a lightweight powerful complement to a cordless and an older Sears drill. It is OK for drilling but not for screws : the trigger is nearly all or nothing and usually strips heads ; in that regards the old Sears is way superior. The chuck works well but is a bit small for tightening by hand. Also the cord is too short and the usual lousy quality plastic - the trigger problems is such that I hesitate putting in the time to replace the cord with quality rubber.

 "A Real Workhorse Tool - Highly Recommended" 2009-06-13
By CFH (Blue Ridge Summit, PA USA)
We use the Hitachi D10VH Drill almost daily for the past 3 years in our small business, mostly to stir thick silicone using a paint mixxer attachment but also to drill holes in wax and mettal.



This is a real bargin for a fairly powerfull and dependable drill. The variable speed control is great since too much speed when using a mixxer attachment would cause a real mess! Changing bits and attachments is quick and easy using the keyless chuck. In addition, it has a nice long cord, so we don't need to mess with an extention cord for most jobs.



A good basic drill that has lasted a long time with a lot of use. If this one dies, I'll buy another one. Highly recommended!

 "Great balance drill" 2009-02-23
By Rich (Seattle, WA)
I picked this drill over similiar price DeWalt 3/8" 7 Amps Pistol Grip Tradesman Drill and Skil 1/2" 7-Amp Variable Speed Drill because of the lightness and compact design of Hitchi D10VH. DeWalt felt too heavy or weight is at the drill tip. The Skill gave you a front handle grip, but most time you drill with one hand and guide with the other. The D10VH weighted center of balance is move back toward the handle, so you will get less hand fatigue. I didn't even know they made drill until I saw one at Lowes. The drill was easy to use, with variable speeds on pressure and you can also control the speed with the dial at the finger trigger which the others don't have (just pressure variable speeds). The keyless chuck works fine and the drill bits that came with it was nice.



Overall this a very good product at an afforable price. that will do most household works. I didn't like the green color scheme at first, but that isn't an issues anymore.




Images Product

Buy Hitachi D10VH 6 amp 3/8-inch Drill with Keyless Chuck Now